Casio CDP-200R User Manual
Page 21
English
Sampling Sounds and Playing Them on the Digital Piano
E-19
You can apply various effects to sampled sounds.
1.
Press
bt
and then use
cl
(10-key) to enter the
tone number (671 to 675) to which you want to
apply effects.
2.
Press
bt
to cycle thorough the available
effects, described below.
• Avoid assigning the same sampled sound (tone number
671 to 675) to the keyboard for play along and for looped
play. Doing so will cause, the Loop 1 effect to be applied to
the keyboard tone while looped play of the sampled sound
is being performed.
You can use the procedure to change the drum sounds that
are assigned to each keyboard key.
• You can store up to three drum sets and store them as tone
numbers 676, 677, and 678. Simply select the tone number
where the drum set you want is located to assign the drum
set sounds to the keyboard.
1.
Press
bs
.
bs
lights.
2.
Press
bt
and then use
cl
(10-key) to enter the
tone number (676, 677, or 678) for the drum set
whose sounds you want to change.
• In place of the above steps, you could press
6
and
bs
at the same times and then select a tone number.
3.
Press
6
.
Applying Effects to a Sampled Sound
Effect Type
(Display)
Description
Original (Orgnl)
Normal sampled tone (no looping, no
effect).
Loop 1 (Loop1)
Loops the sampled sound.
Loop 2 (Loop2)
Loops the sample sound and raises the
pitch of the resonating sound when the
keyboard key is released.
Loop 3 (Loop3)
Loops the sample sound and lowers the
pitch of the resonating sound when the
keyboard key is released.
Pitch 1 (Ptch1)
Changes the pitch from low to high, at an
increasing rate.
Pitch 2 (Ptch2)
Changes the pitch from high to low, at a
decreasing rate.
Pitch 3 (Ptch3)
Changes the pitch from high to low, at a
decreasing rate, and then raises the pitch
when the key is released.
Tremolo (Treml)
Alternates volume between high and low.
Funny 1 (Funy1)
Adds vibrato and changes the pitch by a
gradually increasing amount.
Funny 2 (Funy2)
Alternates between high pitch and low
pitch.
Funny 3 (Funy3)
Adds vibrato and changes the pitch from
low to high.
Incorporating a Sampled Sound
into a Drum Set (Drum Sampling)
N o D a t a
Lights
N o D a t a
Flashes