Casio MPC-701 - Manual (Page 118)

116
3. Remove the screw from the memory replacement cover near the
center of the top section of the turned over FIVA.
4. Lift up the cover to remove.
5. When the cover is removed, the expansion memory slot appears.
Align the notched sections (
q) of the expansion memory board with
the protrusions (
w) of the expansion memory slot, and insert the
expansion memory board diagonally while paying attention to its
orientation and insertion angle until its terminals come into contact
with the inside of the slot (
e) .
Push in from above until the expansion memory board clicks in
place (
r).
w
r
e
q
6. Repeat the above procedure in reverse.
Fit in the memory replacement cover, and fix with the screw.
MPC701M50E#p112~117 02.11.22, 10:15 AM 116