Casio PX-5S - Manual (Page 28)

E-26
Using the Stage Setups
Your Digital Piano supports simultaneous play of up to
four tones on the keyboard. In addition to tone
assignments, you can also save effect, arpeggio, and
other settings as a stage setup (called a “Stage
Setting”), which can be easily recalled at any time, even
while you are playing, to instantly change the Digital
Piano’s setup.
• You can have up to 100 stage setups (numbered 0-0
to 9-9) stored in Digital Piano memory.
1.
Press the dl (BANK) button.
This will cause the button’s lamp to light.
2.
Specify a bank and stage setup (Stage
Setting) number.
• First, holding down the dl (BANK) button, use
buttons dm through dq or buttons ds through em to
specify the bank number.
• Next, use buttons dm through dq or buttons ds
through em to specify the stage setup number.
NOTE
• After specifying the stage setup number, edit the
stage setup contents and save the results. For details
about how to display the editing screen, see “Using
the Editing Function” in “Operations Common to
All Modes” (page E-13).
Playing the Zone 1 Tone on all Keys
For details about zone parts, see the separate
“Tutorial”.
1.
Hold down the dl (BANK) button until its
lamp starts to flash.
This sets up the keyboard so all keys will sound the
tone selected for Zone 1. It also causes Stage Setup
settings to change to presets that are optimized for the
selected tone.
z For details about parameters that can be edited, see
the separate “Tutorial”.
do dp dq
dt ek
dl
el ds
dm dn
em
Overview
Recalling a Stage Setup
PX5_kihon_e.book 26 ページ ２０１４年３月１７日 月曜日 午後２時２分