Casio QV-R3 2 - Manual (Page 2)

54
OTHER RECORDING FUNCTIONS
When you see this:
Green focus frame
Green operation lamp
Green flashing focus frame
Flashing green operation lamp
It means this:
The image is focused.
The image is not in
focus.
3. Press the shutter release button the rest of the
way to record the image.
Using the Macro Mode
The Macro Mode lets you focus automatically on close up
subjects. The automatic focus operation starts when you
press the shutter release button down half way. The follow-
ing is the focus range in the Macro Mode.
Approximately 14cm to 50cm (5.5˝ to 19.7˝)
1.
Keep pressing MF until the is on the
display.
2.
Record the image.
• The focus and image recording operations are identi-
cal to those in the Auto Focus Mode.
• You can tell whether the image is focused by observ-
ing the focus frame and the green operation lamp. The
indications of the focus frame and green operation
lamp are the same as those in the Auto Focus Mode.
IMPORTANT!
• Optical zoom is disabled in the Macro Mode. Zoom is
fixed at maximum wide angle.