Casio QV-R3 2 - Manual (Page 24)

76
OTHER RECORDING FUNCTIONS
IMPORTANT!
• Note that the above histograms are shown for illustra-
tive purposes only. You may not be able to achieve
exactly the same shapes for particular subjects.
• A centered histogram does not necessarily guarantee
optimum exposure. The recorded image may be over-
exposed or under-exposed, even though its histogram
is centered.
• You may not be able to achieve an optimum histogram
configuration due to the limitations of exposure com-
pensation.
• Use of the flash or multi-metering, as well as certain
shooting conditions can cause the histogram to indi-
cate exposure that is different from the actual expo-
sure of the image when it was recorded.
• When using the Continuous Shutter Mode, the histo-
gram appears for the first image only (page 59).
• This histogram does not appear when you are using
Coupling Shot (page 60).
Recording Mode Settings
The following are the settings you can make before record-
ing an image using a recording mode.
• ISO sensitivity
• Enhancement
• Color filtering
• Saturation
• Contrast
• Sharpness
• Grid on/off
• Power on default settings
NOTE
• You can also configure the settings listed below. See
the referenced pages for more information.
— Size and Quality (page 51)
— White Balance (page 72)
— Metering (page 74)
— Flash Intensity (page 48)
— Digital Zoom (page 45)