Casio QV-R3 2 - Manual (Page 42)

FILE MANAGEMENT
94
5.
To turn on date stamping for the prints, press
DISP so
12 12
1
is displayed.
• To turn off date stamping for the prints, press DISP so
12 12
1
is not displayed.
• Repeat steps 3 through 5 if you want to configure
other images for printing.
6.
After all the settings are the way you want,
press SET to apply them.
To configure print settings for all images
1. In the Play Mode, press / DPOF.
2.
Use [ ] and [ ] to
select “All images,”
and then press SET.
3.
Use [ ] and [ ] to specify the number of cop-
ies.
• You can specify up to 99 for the number of copies.
Specify 00 if you do not want to have the image
printed.
4. To turn on date stamping for the prints, press
DISP so
12 12
1
is displayed.
• To turn off date stamping for the prints, press DISP so
12 12
1
is not displayed.
5.
After all the settings are the way you want,
press SET to apply them.