Casio QV-R3 2 - Manual (Page 29)

81
OTHER RECORDING FUNCTIONS
To do this:
Save the current status of the setting
and restore it the next time the
camera is turned on.
Restore the factory default setting
whenever the camera is turned on.
Select this setting:
On
Off
5.
After you are finished configuring settings,
press the MENU button to exit the setting
screen.
Function
Flash
Focus
White Balance
ISO
Metering
Flash Intensity
Digital Zoom
MF Position
On
Setting when
camera is
turned off
Off
Auto
Auto
Auto
Auto
Multi
Normal
On
Last Auto Focus
position that was in
effect before you
switched to manual
focus
Resetting the Camera
Use the following procedure to reset all of the camera’s set-
tings to their initial defaults as shown under “Menu Refer-
ence” on page 131.
1.
In a recording mode or the Play Mode, press
MENU.
2.
Select the “Set Up” tab, select “Reset,” and
then press [ ].
3.
Select “Reset,” and then press SET.
• To cancel the procedure without resetting, select
“Cancel” and press SET.
4.
Select the setting you want and then press
SET.