Casio V-R7000 - Manual (Page 4)

E-2
Safety Precautions
● Please read this “Safety Precautions” thoroughly and use the product accordingly.
● Please pay due attention to the following symbols to help you use the product safely and proper-
ly and to avoid any personal injury or damage to the product.
* Warning
This symbol indicates the contents that may cause death or serious injury to a
person when the product is misused ignoring this symbol.
* Caution
This symbol indicates the contents that may cause injury to a person or property
damage when the product is misused ignoring this symbol.
● The “pictorial indications” in this manual have the following meanings.
’ This symbol means “to be careful = caution”. The example at left is “caution for
electrical shock”.
! This symbol means “must not do = prohibited”. The example at left is “prohibited to
disassemble”.
$
This symbol means “something must be done = instruction”. The example at left is
“disconnect the power plug from the outlet”. The “instructions difficult to express in
picture” are indicated by +.
* Warning
Using the AC power supply
-
’
● Do not twist, pull, heat, modify, or place anything heavy on the power cord. This may
damage the power cord and result in fire or electrical shock.
● Contact the dealer or the CASIO service representative when the power cord is dam-
aged (wire is exposed or disconnected). Using the power cord in such condition may
result in fire or electrical shock.
● Securely insert the power plug all the way.
● Do not touch the power plug with wet hands. This may result in electrical shock.
● Do not use any AC adaptor or the power cord other than the parts included in the
product. Also, do not use the AC adaptor or the power cord included in the product with
other product. This may result in fire or electrical shock.
Power supply voltage
- ● Do not use with any voltage other than the indicated power supply voltage. This may
result in fire or electrical shock.
● Do not overload the outlet with wires. This may result in fire or electrical shock.
Do not disassemble or modify
! ● Do not disassemble or modify the product. There are high voltage parts and sharp
parts inside. Touching them may result in injury or electric shock, or cause a malfunc-
tion or fire.