Powerplus POWXG6025 LAWNMOWER 190CC 550MM EN - Manual (Page 4)

POWXG6025
EN
Copyright © 2013 VARO P a g e | 4 www.varo.com
3 SYMBOLS MARKED ON THE PRODUCT
In this manual and/or on the machine the following symbols are used:
Read manual before use. Keep bystanders away.
Pay more attention to the
operator's hands and feet to avoid
injury.
Fuel is flammable, keep fire
away. Do not use this
machine on slopes greater
than 16,7°.
Toxic fumes! Don't operate inside
house. Wear hearing protection.
Wear eye protection.
When repairing, please take out
the spark plug. Then repair
according to the operation manual.
Caution: Hot engine!
In accordance with essential
applicable safety standards of
European directives.
4 GENERAL SAFETY RULES
WARNING: When using petrol tools, basic safety precautions, including the following, should
always be followed to reduce the risk of serious personal injury and/or damage to the unit.
Read all these instruction before operating this product and retain these instructions for future
reference.
 Operator must be in good physical condition and mental health and not under the
influence of any drug or alcohol which might impair vision, co-ordination or judgment.
 Does not use a mower when tired or fatigued. Lack of alertness may cause serious injury.
 Know your controls.

Read and understand Owner’s manual before operating mower. Learn how to stop the
mower in an emerg
ency. Refer to Operator’s Instructions.
 Do not lend or sell the mower without the Owner’s Manual.
 Be sure that anyone using the mower reads and fully understands the information
contained in this Manual and knows how to safely operate the mower.
 Do not allow children or people unfamiliar with these instructions to use the mower.
 Never mow whilst bystanders or pets are present in the mowing area.
 Never mow while barefoot or wearing open sandals. Wear long trousers and heavy non-
slip shoes.
 It is advisable to wear suitable eye protection when operating a mower.
 Before using, always visually inspect to see that the blades, blade bolts and cutter
assembly are not worn or damaged. Replace worn or damaged blades and bolts in sets to
preserve balance.
 Damaged blades and worn bolts are major hazards.