Powerplus POWXG3023 BRUSH CUTTER 51,7CC EN - Manual (Page 12)

POWXG3012+XG3023 EN
Copyright © 2012 VARO P a g e | 12 www.varo.com
16 TROUBLE SHOOTING
PROBLEM PROBABLE CAUSE CORRECTIVE ACTION
Unit won’t start or
starts but will not run.
Incorrect starting
procedures.

Incorrect carburetor
mixture adjustment
setting.

Fouled sparking plug.

Empty fuel tank.

Primer bulb was not
pressed enough.

Follow instructions in the User
Manual.

Have carburetor adjusted by an
Authorized Service Centre.

Clean/gap or replace plug.

Fill fuel tank with properly mixed
fuel.

Press primer bulb fully and
slowly 10 times.
Unit starts, but
engine has low
power.
Fuel filter is plugged.

Incorrect lever position.

Dirty spark arrester
screen.

Dirty air filter.

Incorrect carburetor
mixture adjustment setting
service dealer.

Replace the fuel filter.

Move to RUN position.

Replace spark arrester screen.

Remove, clean and reinstall
filter.

Have carburetor adjusted by an
Authorized Service Centre.
Engine sputters.
Incorrect carburetor
mixture adjustment
setting.

Air filter is blocked.

Old or improperly mixed
fuel.

Have carburetor adjusted by an
Authorized Service Centre.

Replace or clean the air filter.

Drain gas tank/add fresh fuel
mixture.
No power under load.
Incorrect carburetor
mixture adjustment
setting.

Old or improperly mixed
fuel.

Air filter is blocked.

Fouled sparking plug.

Have carburetor adjusted by an
Authorized Service Centre.

Drain gas tank /add fresh fuel
mixture.

Replace or clean the air filter.

Clean/gap or replace plug.
Runs erratically.
Incorrectly gapped
sparking plug.

Blocked spark arrester.

Dirty air filter.

Clean/gap or replace plug.

Clean or replace spark arrester.

Clean or replace air filter.
Smokes excessively.
Incorrect carburetor
mixture adjustment
setting.

Incorrect fuel mixture.

Have carburetor adjusted by an
Authorized Service Centre.

Use properly mixed fuel (40:1
mixture).