Powerplus POWXG3023 BRUSH CUTTER 51,7CC EN - Manual (Page 3)

POWXG3012+XG3023 EN
Copyright © 2012 VARO P a g e | 3 www.varo.com
BRUSH CUTTER 32,6CC + 51,7CC
POWXG3012 + XG3023
1 APPLICATION
Depending on the assembled cutting tools, the bush cutter can be used to mow lawns or
meadows, and to trim scrub, shrubs, bushes and very small trees. It is for private use. The
device cannot be used for other purposes.
WARNING! For your own safety, read this manual and the general safety
instructions carefully before using the appliance. Your tool should only be
given to other users together with these instructions.
2 DESCRIPTION (FIG.)
1. Cutting disc
2. Drive shaft assembly
3. Throttle trigger
4. Ignition switch
5. Safety switch
6. ‘Bike’ handle
7. Harness attachment
8. Air filter cover
9. Knob fuel tank
10. Fuel tank
11. Primer bulb
12. Choke
13. Protection guard
14. Spool
15. Blocking switch
3 PACKAGE CONTENT LIST

Remove all packaging materials.

Remove remaining packaging and packing inserts (if included)

Check that the package contents are complete

Check the appliance and all accessories for transportation damage.

Keep the packaging materials as far as possible until the end of the warranty period. Then
take it to your local waste disposal system.
WARNING Packaging materials are not toys! Children must not play with
plastic bags! There is a danger of suffocation!
Brush cutter
Harness
Cutting disc Spool
Manual
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
The following symbols are used in this manual and/or on the machine:
Read the manual before
using the machine Wear sturdy shoes with antiskid
soles !