Epson EB-440W - Manual (Page 17)

Name Function
A [t] button Turns the projector power on or off.
s Quick Start Guide
B [Computer] button Each time you press the button, input changes between
images from the Computer1 input port and the
Computer2 input port. s
p.22
C [Video] button Each time you press the button, input changes between
images from the Video input port and the S-Video input
port. s
p.22
D Numeric buttons Use when entering a password. s p.50
E [A/V Mute] button Turns the video and audio on or off. s p.40
F [Freeze] button Images are paused or unpaused. s p.41
G [Auto] button If pressed during projection of a computer image signal, it
automatically adjusts the Tracking-Sync., and Position to
project the optimum image.
H [Aspect] button The Aspect Ratio changes each time the button is pressed.
s
p.41
I [Page] buttons
([Up]) ([Down]) When you are using the Wireless Mouse function, USB
Display function, or the input source is projecting a file of
application software that supports page up/down via the
LAN, you can move the page up and down by pressing
these buttons. s
p.48
J [E-Zoom] buttons
(z)(x) Enlarges or reduces the image without changing the
projection size. s
p.47
K [Menu] button Displays and closes the Configuration Menu. s p.73
L
[ ][ ]
[ ][ ] buttons
When the Configuration Menu or Help screen is
displayed, pressing these buttons selects menu items and
setting values. s
p.73 , p.93
During Wireless Mouse function, the mouse pointer
moves in the direction the button is pushed. s
p.48
Name Function
M [Enter] button When the Configuration Menu or Help screen is
displayed, pressing this button confirms the current item
and moves to the next level. s
p.73 , p.93
Acts as a mouse's left button when using the Wireless
Mouse function. s
p.48
N [Esc] button Stops the current function. If pressed when the
Configuration Menu is displayed, it moves to the previous
level. s
p.73 , p.93
Acts as a mouse's right button when using the Wireless
Mouse function. s
p.48
O [Volume] buttons (a)
(b) (a) Decreases the Volume.
(b) Increases the Volume.
s Quick Start Guide
Caution
Do not start when the volume is set too high.
A sudden excessive volume may cause loss of hear‐
ing. Always lower the volume before turning the
power off, and gradually increase the volume after
turning the power on.
P [Pointer] button Press this button to activate the on-screen pointer.
s
p.46
Q [Help] button Displays and closes the Help screen which shows you how
to deal with problems if they occur. s
p.93
R [Color Mode] button Each time the button is pressed, the Color Mode changes.
s
p.39
S [Num] button Use when entering a Password. s p.50
Part Names and Functions
17