Epson EB-440W - Manual (Page 90)

Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image signal
and Source currently being projected as shown in the following screen shots. Depending on the model used, some input sources are not supported.
s p.21
Computer Signal/Component Video g /USB/USB
Display
Composite video g /S-Video g LAN
Sub-menu Function
Lamp Hours You can display the cumulative lamp operating time * .
When it reaches the lamp warning time, the characters are displayed in yellow.
Source You can display the Source name for the connected equipment currently being projected.
Input Signal You can display the settings of Input Signal in the Signal menu depending on the Source.
Resolution You can display the input resolution.
Video Signal You can display the settings of Video Signal in the Signal menu.
Refresh Rate g You can display the refresh rate.
Sync Info You can display the image signal Information.
This information may be needed if service is required.
Status This information is about errors that have occurred with the projector.
It may be needed if service is required.
Serial Number Displays the projector's serial number.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed in 1hour steps as "10 H", "11H", and so on.
List of Functions
90