Epson EB-440W - Manual (Page 60)

B
Easy Interactive Driver starts automatically.
Use the following procedure to start Easy Interactive Driver if it does
not start.
For Windows
Select Start - Programs (or All Programs) - EPSON Projector -
Easy Interactive Driver Ver.x.xx
.
For Mac OS
Double-click the Applications folder of the hard disk volume on
which Easy Interactive Driver is installed, and then double-click the
Easy Interactive Driver
icon.
C
The connection status is indicated by an icon.
For Windows
The icon is displayed in the notification area of the taskbar.
<Connected> <Not Connected>
For Mac OS
The icon is displayed in the Dock.
<Connected> <Not Connected>
After the projector and computer are connected, you can use Easy
Interactive Pen to perform the same operations as a mouse on the
projection surface.
q
• It may take a few seconds for the icon to indicate the connection
status.
• If the not connected icon is displayed, check whether or not the
EB-460i/450Wi and computer are connected with the USB cable
correctly.
You may be able to resolve the problem by disconnecting and then
reconnecting the USB cable.
D
Use the following procedure to end the Easy Interactive
Function.
For Windows
Click the icon in the notification area of the taskbar, and select
Exit
.
For Mac OS
Click the icon in the Dock or Easy Interactive Driver on the menu
bar, and select Quit from the menu that is displayed.
Easy Interactive Function (EB-460i/450Wi only)
60