Epson EB-440W - Manual (Page 71)

q
If User Pattern is selected when one of the Keystone, E-Zoom, Aspect,
Progressive, and Zoom Adjustment functions is being used, the
function currently being used is cancelled temporarily.
D
When "Do you want to use the currently projected image as
the User Pattern?" is displayed, select Yes.
• You can save at a size of up to the projector screen size.
• When part of the projected image is missing (when the computer
screen is larger than the projection screen), move the displayed box
to select the part of the image to use as the User Pattern.
When "Select this image?" is displayed after you make a selection,
select Yes.
Using Remote Control Using Control panel
• When you press the [Enter] button on the remote control or the
Control panel, the screen size may change depending on the signal
to match the actual resolution of the image signal.
E
When the message "Save this image as the User Pattern?" is
displayed, select Yes.
The image is saved. After the image has been saved, the message "The
User Pattern setting is complete.
" is displayed.
q
• Once a User Pattern has been saved, User Pattern cannot be
returned to the factory default.
• Saving the User Pattern may take approximately 15 seconds. Do not
use the projector or any connected equipment while it is saving,
otherwise malfunctions may occur.
Saving User Pattern
71