Epson EB-440W - Manual (Page 50)

The projector has the following enhanced security functions.
• Password Protect
You can limit who can use the projector.
• Control Panel Lock
You can prevent people changing the settings on the projector without
permission.
s p.52
• Anti-Theft Lock
The projector is equipped with various types of anti-theft security devices.
s p.53
Managing Users (Password Protect)
When Password Protect is activated, people who do not know the Password
cannot use the projector to project images even if the projector power is on.
Furthermore, the user's logo that is displayed when you turn on the
projector cannot be changed. This acts as an anti-theft device as the
projector cannot be used even if it is stolen. At the time of purchase,
Password Protect is not activated.
Type of Password Protect
The following three kinds of Password Protect settings can be made
according to how the projector is being used.
1. Power On Protect
When Power On Protect is On, you need to enter a preset Password after the
projector is plugged in and turned on (this also applies to Direct Power On). If the
correct Password is not entered, projection does not start.
2. User's Logo Protect
There is little point in going to the trouble of saving a User's Logo to indicate the
owner of a projector if the logo display is changed later. When User's Logo Protect
is set to On, changing the following settings for the User's Logo is prohibited.
• Capturing a User's Logo
• Settings for Display Background, Startup Screen, and A/V Mute
from Display in the Configuration Menu.
3. Network Protect
When Network Protect is set to On, changing the settings for Network in the
Configuration Menu is prohibited.
Setting Password Protect
Use the following procedure to set Password Protect.
Procedure
A
During projection, hold down the [Freeze] button for about
five seconds.
The Password Protect setting menu is displayed.
Remote Control
Security Functions
50