Epson Equity 286 PLUS - Manual (Page 7)

Epson
®
Equity
®
286 PLUS
User’s Guide Correction
Please note that the setting of jumper J6 on your computer’s main
system board, described on page 5-7, should be as follows:
*Factory setting
Also note that the jumper settings described on page D-6 should be
reversed. To disable the password function, set jumper J6 to position
B. To enable the password function, set jumper J6 to position A.
On pages 5-13 through 5-17, the illustrations and descriptions of
your computer’s option slots indicate that the 8-bit slot is slot
number 1 and that the 16-bit slots are numbers 2 through 4. The
8-bit option slot is actually slot number 4 and the 16-bit slots are
slot numbers 1 through 3. Please keep this in mind as you read
these pages.
Epson is a registered trademark of Seiko Epson Corporation.
Equity is a registered trademark of Epson America, Inc.
Copyright © 1991 by Epson America,
Inc.