Epson Equity 286 PLUS - Manual (Page 88)

Running WordPerfect, versions 4.0 and 4.1
After you have installed WordPerfect version 4.0 or 4.1 on your
hard disk, follow these steps:
1. Install the VGAMODE utility, if you have not already.
2. Type the following and press Enter to start VGAMODE
and initialize 132-column text mode:
VGAMODE 132, 25
3. Log onto the WordPerfect directory on your hard disk.
4. Type the following and press Enter:
WP /s
5. At the setup menu, select Specify Screen Size.
6. Type 132 to edit the number of columns field.
7. Exit the setup menu.
8. Whenever you run WordPerfect 4.0 or 4.1 with 132
columns, you need to specify 132-column text mode prior to
starting the program. Type the following and press
Enter:
VGAMODE 132, 25
9. Type WP and press Enter to start WordPerfect.
10. To use the full width of the screen, you must change the
margins. (See the WordPerfect documentation for
instructions.)
After you exit WordPerfect, if you want to return to 80-column
mode, type the following and press
Enter:
VGAMODE 80, 25
4-16 Enhancing System Operations