Eaton Electrical SPI9000 - Manual (Page 66)

SPI9000 Inverter Unit FI9 – FI14 User Manual
5-14 For more information visit: www.EatonElectrical.com MN04004002E
September 2006
Figure 5-10: Fault History Menu
System Menu (M6)
You can enter the System menu from the Main menu by pressing Menu Button Right when
the location indication M6 is visible on the first line of the keypad display.
The controls associated with the general use of the inverter, such as application selection,
customized parameter sets or information about the hardware and software are located
under the System menu. The number of submenus and subpages is shown with the symbol
S (or P) on the value line.
Table 5-10 has a list of the functions available in the System menu.
11 Output phase
T1 T7
Fault history
H1
PUSH to Reset
H3
Operation days
17
Operation hours
13:25:43
5 ChargeSwitch