Epson Endeavor - Manual (Page 146)

Diskette Drive Problems
If you see a diskette error message or have difficulty with a
diskette drive, follow these steps:
1. If you have problems with a new diskette drive that someone
else installed for you, consult that person about the
problem.
2. If you installed the drive yourself, did you carefully follow
all the steps in Chapter 3? Review the instructions and
check all the cable connections to make sure you have
installed the drive correctly.
3. Did you run the SETUP program and configure the correct
type of diskette drive as part of your system? (See Chapter
2 of the
Setup Guide for instructions.)
4. Try running the Diskette drive diagnostic tests described in
Chapter 4. If the diagnostics program indicates an error,
contact your Authorized Epson Servicer.
5. If the diskette drive is making loud or unusual noises, do not
attempt any further examination of it. Contact your
Authorized Epson Servicer.
Troubleshooting
6-17