Epson Endeavor - Manual (Page 16)

How to Use This Manual
This manual contains the information you need to get the best
results from your computer. You don’t have to read everything
in this book; check the following summary.
Chapter
1
covers general operating procedures, such as turning
the computer on and off, using disks and disk drives, entering a
password, and changing the processor speed.
Chapter 2 describes how to remove and replace the computer’s
cover, change jumper settings, and install optional equipment
such as option cards and memory modules.
Chapter 3 explains how to install and remove disk drives.
Chapter 4 provides instructions for running system diagnostics.
Chapter 5 gives the procedure for formatting a hard disk.
Chapter 6 contains troubleshooting tips.
Appendix A lists the specifications of your computer.
At the end of this manual, you’ll find a Glossary and an Index.
Note
Please see the Setup Guide for instructions on setting up your
system and running the SETUP program.
4 Introduction