4 inverter lamp / inverter board removal – Epson Perfection 610 User Manual
Page 30
Advertising
EPSON Perfection 610
Revision B
Assembly and Disassembly
Disassembly Procedures
30
4.2.4 Inverter Lamp / Inverter Board Removal
1. Release the Carriage Lock. (See Section 4.2.1.)
2. Remove the Document Cover. (See Section 4.2.2.)
3. Remove the Upper Housing. (See Section 4.2.3.)
4. Remove the two screws (CCP, M3x8) on the Carriage Unit. (See
5. Using a standard screw driver, lift up the carriage cover in the
Carriage Unit, and then move it to the front to remove it. (See Figure
4-9.)
Figure 4-8. Carriage Unit Disassembly (1)
Figure 4-9. Carriage Unit Disassembly (2)
CCP Screws (M3x8)
Advertising