Elmo Visual Presenter HV-5100XG - Manual (Page 14)

13
Receivable Range
Point the infrared emitting part of the wireless remote control at the infrared sensor of this
product, and press the button for desired function. The receivable range may be narrowed
when the Presenter is placed under sunlight, near an inverter fluorescent lamp or in any other
unfavorable surroundings. Depending on the conditions of fluorescent lamps, etc. the sensor
may fail to receive the infrared light. In such a case, relocate this poduct, or take other
countermeasures.
• Receivable range
Distance : Approx. 7 m (23 ft.) or less from the light receiving area to the front of the
wireless remote control
Angle : Approx. 30° degrees or less from the light receiving area to the front of the
wireless remote control rightward, leftward, upward and downward,
respectively
2
WIRELESS REMOTE CONTROL
Preparation
Remove the battery case cover by pressing downward on the [ OPEN] mark part in the
direction as indicated by the arrow.
Install 2 pcs of batteries (type R03, AAA) into the case in the direction as indicated there.
Install the batteries with the right polarity.
Change the batteries once a year.
The batteries supplied with this product are only for use in initially confirming the operation of
this product. It is not guaranteed that these batteries can work effectively for the indicated
period.
30
° 30
°
30
°
30
°
30
°
30
°
°
1
2
3
4
5
6
7
8
9
10
11