Elmo Visual Presenter HV-5100XG - Manual (Page 26)

1
2
3
4
5
6
7
8
9
10
11
25
Posi / Nega Conversion
To show a negative film.
Press the [POSI / NEGA] button on the front
operation panel or wireless remote control, the
indicator lamp lights up and the image will be
converted to the NEGA mode accordingly.
When the [POSI / NEGA] button is pressed again,
the indicator lamp goes out and the POSI mode is
resumed.
In the condition of NEGA, the followings are
restricted.
• When contrast ON: Gamma adjustment is not
available.
• Only When Gamma setting γ = 07: Contrast can
be turned ON.
NEGA setting at the factory
• White balance: One-push mode
• Gamma:
γ = 07 (0.3)
• Contrast: ON
PAUSE
LAMP POSI/NEGA COLOR/B&W
IRIS
AF
2x
SET
RGB1 RGB2
NORMAL OPEN CLOSE
PRESET CALL
TELE ZOOM
MAIN MONITOR OUTPUT
WIDE NEAR FOCUS FAR
UPPER BASE
SET IMAGE CALL
MONITOR OUTPUT PAUSE IRIS
CONTRAST POSI / NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
ZOOM
F.A.M.
MAIN
OPEN CLOSE
TELE WIDE
RGB1
RGB2
AF
AUTO/MANUAL
UPPER / BASE / OFF
ONTRAST POSI / NEGA
LAMP
WHITE
ALANCE
IMAGE
ROTATION
UPPER / BASE / OFF
LAMP POSI/NEGA COLOR/B&W
SET PRESET CALL
UPPER BASE
SET IMAGE CALL
Image Rotation
When the [IMAGE ROTATION] button on the front
operation panel is pressed, the image rotates. Every
time the [IMAGE ROTATION] button is pressed, the
image rotates counterclockwise by 90°.
When the image is rotated, indicator lamp goes ON.
The image does not rotate when Pause mode is
working.
MONITOR OUTPUT PAUSE IRIS
CONTRAST POSI / NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
ZOOM
F.A.M.
MAIN
OPEN CLOSE
TELE WIDE
RGB1
RGB2
AF
AUTO/MANUAL
UPPER / BASE / OFF
ONTRAST POSI / NEGA
LAMP
WHITE
ALANCE
IMAGE
ROTATION
UPPER / BASE / OFF
Front operation panel Wireless remote control
Front operation panel
Wireless remote control
Front operation panel
Front operation panel