White balance – Elmo Visual Presenter HV-5100XG User Manual
Page 28
1
2
3
4
5
6
7
8
9
10
11
27
White Balance
The camera of this product automatically adjusts the
shooting color balance (AUTO mode). However,
depending on the color arrangement of document or
the like, this color balance may be lost.
In such case, shoot the stage surface, and press the
[WHITE BALANCE] button on the front operation
panel. Then, the indicator lamp blinks and then lights
up, and the white balance is fixed. (ONE-PUSH
mode)
When the [WHITE BALANCE] button is pressed
again, the indicator lamp goes out, and the mode
returns to the AUTO mode.
AUTO .................. To set the white balance in the auto follow mode (initial setting).
ONE-PUSH ........... To set the push-set white balance. By pressing the [WHITE BALANCE]
button, the white balance for the then color temperature is fixed.
The automatically followed color temperature ranges from approx. 3000k to 8000k.
When the white balance is set to the MANUAL mode on the OSD, the white balance is fixed,
and the indicator lamp remains lighting. When the white balance button [WHITE BALANCE]
on the operation panel is pressed while the indicator lamp is lighting, the indicator lamp goes
out, and the mode is switched to the AUTO mode.
• OSD.......
P.33
Reference Page
MONITOR OUTPUT
PAUSE
IRIS
CONTRAST
POSI
/
NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
ZOOM
F.A.M.
MAIN
OPEN
CLOSE
TELE
WIDE
RGB1
RGB2
AF
AUTO/MANUAL
UPPER / BASE / OFF
CONTRAST
POSI
/
NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
UPPER / BASE / OFF
Front operation panel
Front operation panel