Enterasys Networks Enterasys Gold Distributed Forwarding Engine 4H4285-49 - Manual (Page 60)

Using LANVIEW
4-4 Troubleshooting
CPU Off Power off. Ensure chassis has adequate power.
Amber Blinking. Module in process
of booting. None.
Solid. Testing. If the LED remains amber for several
minutes, contact Enterasys Networks
for technical support.
Green Blinking. Image starts
running. None.
Solid. Functional. None.
Red Solid. Processor in reset. None.
Green
and
Amber Blinking. Indicates that the
module is in the process of
shutting down. None. This state is activated when the
OFFLINE/RESET switch is pressed for
less than 1 second to start the process
of an orderly shutdown.
While in this state, do not remove any
DFE module.
CPU (cont’d) Amber
and Off
Alternately (67% on, 33%
off). Indicates that a
shutdown process has
completed. This indication
will remain for 60 seconds
before automatically
restarting. While in this state, you have 60 seconds
to safely remove the DFE-Gold module
from the chassis.
Table 4-1 LANVIEW LEDs (continued)
LED Color State Recommended Action