Florabest FTP 400 B2 - Manual (Page 41)

41
GB
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Areas of Application
The submersible water pump acquired by
you is designed for pumping water with a
maximum temperature of 35°C.
This pump can be used in every case where
water must be pumped, for example in the
household, in agriculture, in horticulture, in
sanitation work and in many other applica-
tions.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.
The operator or user is responsible for ac-
Content
Introduction ...............................41
Areas of Application ..................41
General Description ....................42
Scope of Delivery ............................42
Overview .......................................42
Functional description ......................42
Technical Data ............................42
Performance data ............................43
Notes on Safety .........................43
Symbols in the manual .....................43
Explanation of symbols ....................43
General notes on safety ...................43
Start-up .....................................45
Assembly .......................................45
Connection of the pressure line .........45
To erect / suspend ..........................46
Controls before operational start-up ...46
Operation ..................................46
Mains connection ............................46
Switching on and off .......................46
Working ........................................47
Maintenance and Cleaning .........47
General cleaning instructions ............47
To replace the backflow stop ............48
To clean the paddle wheel ...............48
Storage ......................................48
Waste Disposal and
Environmental Protection ...........48
Spare Parts Order ......................48
Faults - Causes - Remedies .........49
Guarantee .................................50
Repair Service ............................51
Service-Center ............................51
Service Branch ...........................51
Translation of the original
EC declaration of conformity ......52
Exploded Drawing .....................53