Operation – Florabest FAT 18 B3 User Manual

Page 52

Advertising
background image

52

GB

To insert the battery:

5. To insert the battery (16), place it

on the guide track (20) and push

it into the appliance. It will audi-

bly snap in.

Operation

Caution: risk of injury! Do not

operate the appliance with-

out the protective cover. To

operate the appliance, wear

suitable clothing, eye and ear

protection.

Prior to every use, check that

the appliance is operative. Do

not block the On/Off switch

or the switch lock. They must

reliably turn off the motor

when you release the switch.

Do not operate the appliance

if one of the switches is dam-

aged.

Please observe local regulations

concerning noise protection.

Turning on and off

Maintain a firm stand and hold the

appliance well with both hands and

at some distance away from your

body. Before turning on the appli-

ance, check that it will not touch

any objects.

1. Check that the battery (16) is in

(see “Assembly instructions - In-

serting the battery”).

2. To turn on, use your thumb to

actuate the switch lock (3), then

press the On/Off switch (2). Re-

lease the switch lock.

3. To turn off, release the On/Off

switch (2). There is no continuous

operation mode.

After turning off the appli-

ance, the trimming assembly

will keep revolving for some

time. Allow the trimming as-

sembly to come to a stand-

still. Neither touch nor slow

down the moving cutting in-

sert. Risk of injury!

Checking the battery charge

level

The battery’s ( 18) charge level is indi-

cated by the charge state indicator (

16).

Press the PRESS button on the battery.

The LEDs indicate the battery’s charge

level.

one green LED = battery low

two green LED = charging about half

three green LED = battery fully charged

red LED

= charging the battery

Trimmer settings

To adjust the auxiliary handle:

The auxiliary handle can be set to various

positions. Adjust the handle such that the

cutting disk slightly tilts forward in your

working position.



Loosen the screw (23) in the handle

and move the auxiliary handle (5) to

your favourite position. Tighten the

screw in the handle.

Advertising
This manual is related to the following products: