Livarno Halogen Under-Cupboard Light - Manual (Page 6)

6 GB
Introduction
Halogen Under-Cupboard Light
Q Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. Please read carefully
and completely through these operating instructions.
Fold out the page with the illustrations. These instruc-
tions form part of the product and contain important
information about bringing the product into use and
its handling. Always observe all the safety advice.
Check that the correct mains voltage is available
and that all the parts have been properly assem-
bled before bringing into use. Should you have any
questions or be uncertain as to how to operate the
device, please get in touch with your dealer or ser-
vice point. Please keep these instructions in a safe
place and hand them on to a third party if necessary.
Q
Proper use
This light is suitable only for interior use, in dry and
enclosed spaces. The light should be positioned
within reach so that the switch can be operated
conveniently. The light can be fitted to all normally
inflammable surfaces. Any use other than that
described above or modification to the lamp is not
permitted and may lead to damage to people or
property. Moreover, there is the risk of injury or loss
of life and that the lamp may develop technical
faults such as short circuit or fire or give an electric
shock. This lamp is intended for use only in a domestic
environment.
Q Included items
Check that all the items and accessories are present
and that the lamp is in perfect condition immediately
after unpacking.
1 Halogen under-unit light, Model 3005 / 034L or
3005 / 036L
4 Halogen bulbs, G4, 12 V, 20 W
1 Mains lead
1 Connection lead
2 Dowels (for countersunk head screws)
2 Countersunk head screws (for wood)
2 Countersunk head screws (for masonry)
2 Caps
1 Instructions for use
Q
Description of parts
and features
1 Dowel
2 Halogen under-unit light
3 Screw
4 Cap
5 Mains lead
6 Light connector socket
7 Motion sensor
8 Connection socket
9 Time control TIME
10 Day / night control LUX
11 Cover
12 Toggle switch
13 Bulb
14 Connection cable
Q
Technical data
Operating voltage,
primary:
230 V~ 50 Hz
Operating voltage,
secondary:
12 V , 3 x 20 W
Dimensions: 60 x 7 x 2.5 cm (L x W x H)
Protection class: II /
Protection class: IP20 (suitable for an indoor
environment only)
Bulbs: Halogen bulbs, G4, 12 V,
20 W
Rated power: 3 x 20 W
Motion sensor
Light on time
(adjustable):
approx. 20 s – approx.
6 min.
Detection range: approx. 1.5–3m (varies by
installation)
Twilight sensor: Yes