Livarno LLES B2 - Manual (Page 8)

LIVARNO LUX LLES B2
6 - English
You must not hang any objects on the energy-saving outdoor spotlight. The housing is not
designed to carry loads. Otherwise, the energy-saving outdoor spotlight could be damaged.
Never use such optical instruments as a magnifying glass to look directly into the light beam. This
can lead to eye injuries. In the event of a suspected eye injury, consult a doctor immediately.
Copyright
All information contained in these instructions is subject to copyright and is provided for information
purposes only. It is only permitted to copy or duplicate data and information with the express and written
consent of the author. This also includes commercial use of the content and data. The text and illustrations
are based on the state of the art at the time of printing. Subject to change without notice.
Prior to use
Remove the energy-saving outdoor spotlight and the installation materials from the packaging.
Check the energy-saving outdoor spotlight for signs of damage. If damaged, the energy-saving outdoor
spotlight must not be used.
Only use energy-saving spiral light bulbs with E27 base and a maximum power of 23 watts!
Please note:
The supplied energy-saving light bulb is not dimmable. Do not use the energy-saving outdoor
spotlight with the supplied light bulb in circuits with dimmers.
The energy-saving light bulb (10) is stored within the spotlight so that it can be transported safely. Loosen
the 2 screws (1) with a Phillips screwdriver and carefully tilt the front pane (9) upwards. Remove the
packaging with the energy-saving light bulb (10). Open the packaging, remove the energy-saving light
bulb (10) and screw it into the socket in a clockwise direction. When doing so, handle the energy-saving
light bulb (10) by its base and not by its glass body. The bulb should only ever be handled with a cloth.
Close the front pane (9) downwards now and tighten the 2 screws (1) again.
The correct installation location
Select the installation location carefully and prepare well for the installation.
 Place all individual parts, required tools and installation material so they are well arranged and ready
to hand.
 The energy-saving outdoor spotlight may be mounted only on stable substrates, for example,
brickwork.