Introduction / safety, Led pendant lamp introduction, Intended use – Livarno 4280-042L /4281-048L User Manual

Page 4: Scope of delivery, Parts description, Technical data, Safety safety information

Advertising
background image

5

GB

Introduction / Safety

LED pendant lamp

Introduction

Congratulations on your new product.
You have selected a high quality product.
Please be sure to carefully read the com-

plete operating instructions. Fold out the page with
the illustrations. These instructions are part of the
product and contain important information on setup
and handling. Always follow all safety instructions.
Before using this product for the first time verify the
correct voltage and that all parts are properly in-
stalled. Should you have any questions or you are
unsure about operating the product, please contact
the dealer or service centre. Please keep these in-
structions in a safe place and pass them on third
parties as applicable.

Intended use

This light is only suitable for indoor use in dry and
enclosed spaces. The light can be fastened to any
normally inflammable surface.

Scope of delivery

Check immediately after unpacking that the parts are
complete and that the product is in proper condition.

1 LED pendant light, model 4280-042L /

4281-048L

4 (4280-042L) or 1 (4281-048L) pieces of lamp

glass

8 (4280-042L) or 2 (4281-048L) screws for lamp

glass

8 (4280-042L) or 2 (4281-048L) washers (metal)
8 (4280-042L) or 2 (4281-048L) washers (rubber)
1 Allen key
1 Philips screwdriver
1 Rope smoother
2 Screws
2 Rawlplugs
1 Set of instructions for use

Parts description

1

Mounting bracket

2

Rawlplug

3

Screw (mounting bracket)

4

Connection housing

5

Screw (connection housing)

6

Rope smoother

7

Counterweight

8

Bushing

9

Lamp glass

10

Washer (rubber)

11

Washer (metal)

12

Screw (lamp glass)

13

Terminal block

14

Protective tube

Technical Data

Item no.:

4280-042L / 4281-048L

Operating voltage: 230–240 V∼ 50 Hz
Illuminant:

4 LED modules (LEDs not
replaceable)

Rated power:

4 x 5.5 W

Protection class:

II /

Protection type:

IP20

Safety

Safety information

Damage due to failure to comply with these operating
instructions will invalidate the guarantee! We assume
no liability for consequential damage! We assume
no liability for material damage or personal injury
due to improper handling or failure to comply with
the safety instructions!
Only use the included parts, using other parts will
void the warranty.

Avoid the risk of fatal injury
from electric shock

Advertising