Silvercrest SWW 1500 A1 - Manual (Page 10)

8
Initial use/Operating components
SWW 1500 A1
GB
Electrical connection
For safe and faultless operation of the device with electrical connection observe
the following advice:
CAUTION
Before connecting the device compare the connection data (voltage and ►
frequency) on the rating plate with that of your mains power supply. This
data must be in agreement so as to avoid damage to the device.
Make sure that the mains power cord is not damaged and is not running
►
over hot surfaces and/or sharp edges.
Make sure that the mains power cord is not stretched or knoted.
►
Inserting batteries into the remote control
Open the battery compartment on the rear panel of the remote control. ♦
Insert the batteries, type AAA/Micro into the battery compartment. ♦
Make sure the polarities are correct.
Close the battery compartment. ♦
Operating components
Device
Display
2 AUTO ON button
3 POWER/MODE button
4 +/- buttons
5 AUTO OFF button
6 POWER main switch
7 Mains power cord
8 Pedestals
9 Heating element
10 Carrying handle
Remote control
11 AUTO ON button
12 POWER/MODE button
13 +/- buttons
14 AUTO OFF button
15 Battery compartment