Assembly, Stationary assembly, Wall mounting – Silvercrest SWW 1500 A1 User Manual
Page 11
9
Assembly
SWW 1500 A1
GB
Assembly
CAUTION
For assembly place the device on a soft underlay such as, for example,
►
a carpet in order to avoid damages.
Stationary assembly
Fold the carrying handle
♦
10
backwards and place the device with the
underside upwards, on a soft underlay.
Assemble the pedestals
♦
8
with both screws
A
to the device (see diagram
Pedestal assembly).
10
A
8
Diagram Pedestal assembly
Wall mounting
WARNING
Make sure that when you are drilling you do not damage any electrical
►
wires or other installations in the wall such as water pipes.
The supplied rawlplugs are only suitable for a mounting on concrete or
►
stone. Before starting the installation, please check your installation location
carefully for its suitability for the rawlplugs. If in doubt, call a professional.
NOTICE
When selecting the mounting location make sure that a suitable mains wall
►
socket is located within the plug-in radius of the mains power cord.