Epson 8150i - Manual (Page 16)

Presenting Without a Computer 11
Transferring Your Presentation to the
Projector
Follow the instructions in this section to transfer a supported
application or image file directly to the projector; to copy a scenario to
the projector, see the previous section.
When you send your presentation to the projector, it gets stored on
the projector’s removable memory card. Depending on how your
network is set up and where you’re located, choose one of these ways
to transfer your presentation to the projector:
■ To send your presentation from your office PC to the projector,
see below.
■ If you’re in the meeting room with the projector and you need to
download your presentation files from a remote location, see
page 13.
■ If you want, you can copy your presentation directly onto the
memory card; see page 16.
Sending the Presentation from Your Office
If you’ve created your presentation on your office PC, the easiest way
of getting it to the projector is by using the EMP File Utility software;
see below.
If your network is set up to prevent sending a presentation directly to
the projector, you may have to upload it to a file server first. Use the
file utility you would normally use (such as Windows
® Explorer) to
transfer your presentation to the server; then see “Downloading Your
Presentation While in the Meeting Room” on page 13 to finish
getting your presentation to the projector.
Using the EMP File Utility Software
Follow these steps to send your presentation to the projector:
1. Click Start , Programs , EasyMP , then select EMP File Utility .
note
You may be able to launch
your presentation without
first transferring it to the
projector; see page 17.