Epson 8150i - Manual (Page 65)

60 Solving Problems
Using On-Screen Help
If you see a No Signal message or your audio isn’t working, you can
get help by pressing the blue ? Help button on top of the projector or
under the cover on the remote control. The following choices are
available:
■ Help for the image
Tells you what to do if you see a No Signal message
■ Help for the sound
Tells you what to do when your audio isn’t working
■ Language selection
Lets you display the help information and projector menus in any
of nine different languages
Follow these steps to get help:
1. Press the blue ? Help button. You see the help menu.
2. Use the up or down arrow buttons on the control panel (or
move the Enter button up or down on the remote control) to
highlight one of the options. Then press the or Enter button to
select it.
3. Press the or Enter button again to view the solutions. (Press
Esc if you need to back up.)
4. Press the down arrow button on the control panel (or press down
on the Enter button on the remote control) to display additional
text.
5. To exit the Help system, press the blue ? Help button.
If none of the suggestions solves your problem, see additional
solutions to problems in the following sections.
caution
Don’t hold the ? Help button
for more than 5 seconds, or
the projector will enter the
mode for resetting the lamp
timer.