Epson 8150i - Manual (Page 45)

40 Displaying and Adjusting the Image
3. To display the image, do one of the following:
■ On the projector’s control panel, press the Comp/
EasyMP.net button to switch between EasyMP,
Computer 1, and Computer 2; or press the Video button to
switch between the video sources (composite, component, or
S-video).
■ On the remote control, press
the
Comp1 , Comp2/YCbCr ,
EasyMP.net , or Video
button to switch sources.
If you see a blue screen with the
No Signal message, you may have
to press the button again to select
the correct source. If a projected
image fails to appear, see page 63
for help.
note
It takes a few seconds for the
projector to sync up after
selecting the source. After
pressing one of the source
buttons, wait a moment for
the image to appear.
Power
Video Comp/
A/V mute
Resize
Esc Help Menu
Shift
Keystone
Volume
Sync.
Sync.
T ra
c k in
g
T
ra
c k in
g source
buttons
Esc
Menu
Comp1
P in P Preset
Video
Help
- Volume +
Capture
Auto
APPs
Resize
Comp2/YCbCr
select
RCA video
or S-video
select
EasyMP
select
computer 1
select computer 2 or
component video