Silvercrest SGKT 50 A1 - Manual (Page 215)

SilverCrest SGKT 50 A1
English - 213
If an entry of the calls list is longer than 12 digits or characters, the icon
appears on the display [17]. Press the  button on the multifunction control [16] to
show the other digits. Now the icon appears on the display [17]. Press the 
button on the multifunction control [16] to show the first digits again.
If the phone number has been saved in the phonebook, the corresponding name
will be shown. Press the  button on the multifunction control [16] to show the
telephone number.
Calling a phone number from the calls list
To dial a phone number from the calls list, proceed as follows:

Press the  or  multifunction control buttons [16] to select the entry that you want to
call from the calls list.
 Pick up the receiver to call the selected entry.
 To finish the call, put down the receiver again.
Saving a phone number from the calls list to the phonebook
To save a phone number from the calls list to the phonebook, proceed as follows:

Press the  or  multifunction control buttons [16] to select the phone number from the
calls list that you want to save to the phonebook and then press the Menu/OK button
[15].

Press  or  on the multifunction control [16] to select the “SAVE TO PB” menu item
and then press the Menu/OK button [15] to confirm .
 “NAME ?” will appear on the display [17]. Next enter the name you want via the
numeric buttons [24]. Press the button [26] to erase any mistyped character. Press
the Menu/OK button [15] to save the name.
 The phone number will appear on the display [17]. Now you can edit the phone number
via the numeric buttons [24]. Press the button [26] to erase a digit. Press the
Menu/OK button [15] to save the phone number.
 A confirmation beep will sound and the “ENTRY SAVED” message will appear for a few
seconds on the display [17].