Electrolux E30DF74EPS - Manual (Page 10)

10
Preparing for Installation
CABINET AND COUNTERTOP PREPARATION
NO NO NO NO NOTES TES TES TES TES
• If cabinet storage space is to be provided directly above the range, the risk of
personal injury may be reduced by installing a ventilating hood that projects
horizontally a minimum of 5 inches beyond the face of the cabinets.
• The range may be installed flush to the rear wall. We recommend installing a
non-concombustible material on the rear wall above the range and up to the vent
hood. It is not necessary to install non-combustible materials behind the range
below the countertop height.
• The minimum distance from the sides of the range above the countertop to
combustible side walls must be at least 10 inches.
• The E36DF76EPS and E48DF76EPS ranges are delivered with a 3” backguard from
the factory. 9” and 24” backguards are available as options. The E30DF74EPS
range is delivered with a 6” backguard from the factory. 9” and 12” backguards
are available as options.
• Utilities may be located: In the lower left corner of the adjacent right cabinet.
(Recommended)
IMPOR IMPOR IMPOR IMPOR IMPORT T T T TANT ANT ANT ANT ANT
• Contact your local building department to verify compliance with local code
interpretation.