Electrolux E30DF74EPS - Manual (Page 19)

19
Installation
MAKING THE ELECTRICAL CONNECTION
Grounding Instructions
This appliance must be electrically grounded. With the range positioned
directly in front of the cabinet cutout, feed the appliance conduit to the electrical
junction box. Then, depending upon local codes, utilize one of the following
techniques to connect the appliance to the electrical power supply:
Connecting to a Four-Wire Electrical System
1. Separate the green and white appliance wires.
2. Connect the white appliance wire to the
neutral (white) supply wire in the junction
box.
3. Connect the black appliance wire to the
black (L1) power supply wire in the
junction box.
4. Connect the red appliance wire to the red
(L2) power supply wire in the junction box.
5. Connect the green appliance wire to the
green house grounding wire in the junction
box.
WARNING WARNING WARNING WARNING WARNING
• Models E30DF74EPS, E36DF76EPS and E48DF76EPS must be connected to a
grounded, metallic, permanent wiring system. Alternatively, a grounding
conductor should be connected to the grounding terminal or lead on the
appliance. Failure to do so may result in an electric shock hazard.
• Do not use an extension cord with this appliance. Such use may result in fire,
electrical shock, or other personal injury.
• Do not install a fuse in the neutral or ground circuit. A fuse in the neutral or
ground circuit may result in an electrical shock hazard.
Figure 14
Conduit from
appliance
Cable from
power supply
Wire nut
(4 places)
Junction
box
RED
RED
GREEN
GREEN
WHITE
WHITE
BLACK
BLACK
Connecting the appliance to a
four-wire power supply