Epson 386SX - Manual (Page 132)

If you want information about more than one command you __
can type
HELP
followed by the names of the commands,
each separated by a space.
To use the HELP program, follow these steps:
1. If you don’t have a hard disk, make sure your Working
diskette is in drive A.
2. If necessary, type
A
: and press Enter to log onto drive A.
3. If you want to use the HELP menu, type
HELP
and press
Enter. Use the cursor keys to highlight the command you
want information about and press Enter.
If you want to bypass the HELP menu and see information
about one command, type
HELP
followed by the name of
that command. For example, to see help information about
the COPY command, type the following and press
Enter:
HELP COPY
If you want to see information about more than one
command, type
HELP
and the names of the commands you
want information about. Separate each command name
with a space, as in the following example:
HELP DISKCOPY FORMAT COPY
The HELP information for the first command is displayed
first.
4. If there is more than one screen of information about the
command, you see the prompt
PgUp
at the top of the
screen. Press the PgUp key to display the next screen of
text.
4-36 Using MS-DOS with Your Equity 386SX