Epson 386SX User Manual
Page 25
Follow these steps to connect the monitor:
1. Place your monitor on top of or near the computer. It is
easiest to connect the monitor cable if the backs of the
monitor and the computer are facing you.
2. If necessary, connect the monitor cable to the monitor.
(Some monitors come with permanently attached cables.)
3. Connect the appropriate end of the monitor cable to the
video card connector on the back of the computer, as
shown below. If the plug has retaining screws, tighten them
by hand or with a screwdriver, depending on the screw type.
II
I
I
I
retaining
screws
4. If there are any switches or jumpers on the video card (for
example, to indicate color or monochrome), be sure they
are set properly. (See the documentation that came with
your monitor or video card for instructions.)
Setting Up Your System
1-5