Epson 386SX - Manual (Page 48)

To enter a password, type any combination of characters
(including letters, numbers, and blank spaces) up to a total
of seven characters. Use the backspace key to delete
mistakes.
Do not use characters requiring the SHIFT key, such as $,
@, or *, in your password. The Equity 386SX does not
recognize the SHIFT key when you use your password to
access the system.
WARNING
Be sure to remember the password you enter or write it
down and keep it in a safe place. If you cannot remember
the password you enter now, you will not be able to
access the computer the next time you turn it on.
If you want to return to the password submenu without
saving any changes, press E
SC
.
4. After you enter a password, press Enter to return to the
password submenu.
5. Highlight
Network server mode. To turn network
server mode on or off, press Enter.
The Setup program requires a power-on password to turn
network server mode on. If you did not enter a password,
this message appears:
Set a power-on password first
To enter a password, highlight
Power-on password
and follow steps 3 and 4 above.
6. After you enter a power-on password and turn network
server mode on or off, highlight
* * * * SAVE
SETTINGS
* * * * and press Enter to return to the main
Setup menu.
2-10 Running the Setup Program