Epson P-7000 - Manual (Page 23)

Backing Up Data from the Viewer 23
4
4
4
4
4
4
4
4
4
4
Englis
h
Note:
❏ When the viewer is connected to a computer, do not
connect a USB device to the Host-standard A, or touch
the connector interface.
❏ After connecting the viewer to the computer, the LCD
turns dark to save battery power. This is not a
malfunction.
6. Launch the Epson Link2 software.
For Windows:
Click Start, point to All Programs (or Programs),
then select EPSON. Select Epson Link2, and then
click Epson Link2.
Alternatively, click the Epson Link2 shortcut icon on
the desktop.
For Macintosh:
Double-click the Epson Link2 icon in the Epson
Link2 folder.
Only data that has not yet been backed up is copied
to the computer automatically.
7. Disconnect the viewer from the computer.
For Windows:
Click Unplug or Eject Hardware on the computer
screen, and then remove the USB cable.
For Macintosh:
Drag and drop the viewer icon and memory cards (if
inserted) to the trash can on the computer screen,
and then remove the USB cable.