Medal Sports YSLSUIG3002 - Manual (Page 12)

Assembly Instructions
Step 7:
Step 8:
18. Tie the guide wire in the Scorer Arm (#16) to
the scorer wire. Pull bottom end of the guide
wire to lead the scorer wire through the
Scorer Arm (#16) and then attach the Scorer
Arm (#16) to the Scorer Connectors using
four Bolts (#31). See FIG.7 and 7A. Note:
Do not tighten the Bolts (#31) at this time.
19. Attach the Scorer Arm (#17) to the Scorer
Connectors using four Bolts (#31). Note: Do
not tighten the Bolts (#31) at this step.
20. Insert the Scorer Wire from the Scorer (#11)
through the opening on the side top rail of the
table. See FIG.8A.
21. Attach the Scorer Arms (#16 & #17) to the
side top rail of the table using four Screws
(#32) per Scorer Arm. See FIG.8A. Now go
back and tighten the Bolts (#31) securely.
22. Attach the Scorer Arm Holders (#12) to the
side top rail using two Screws (#33) per
Holder. See FIG.8.
11
FIG.7
FIG.8
31
16
16
17
Scorer Wire
Guide Wire
31
Scorer Wire
Guide Wire
16
FIG.7A
32
12
16
33
12
11
17
Score Wire
FIG.8A