Medal Sports YSLSUIG3002 - Manual (Page 13)

15
10
21
Assembly Instructions
Step 9:
Step 10:
23. Connect the Scorer Wire with the Control
Box (#15).
24. Plug the Adapter wire (#21) to the Control
Box (#15), and then connect the Home &
Visitor Sensor Wire (pre-installed with the
puck catcher) to the Control Box (#15).
25. Tear off the backside paper of the Felt Pads
(#20) and stick them at the bottom of the
Pushers (#18).
12
FIG.9
FIG.10
Underside the table
Short Sensor Wire Long Sensor Wire
Scorer Wire
Adapter Wire
20
18