Medal Sports YSLSUIG3002 - Manual (Page 9)

Assembly Instructions
Step 1:
Step 2:
1. Find a clean, level place to begin the assembly
of your Hockey Table. The table will be
assembled upside down and then turned over
on its legs once the assembly completed. This
game table is heavy, and turning it over will
require at least four adults.
2. Remove all the parts from the box and verify
that you have all of the listed parts as shown
on the parts list page. Carefully cut or tear the
four corners of the box so that the bottom of
the box can be used as your work surface.
3. Attach the Side Aprons (#2) to the Main Frame
(#1) using two Butterfly Bolts (#37) per Side
Apron.
4. Attach the End Aprons (#3 & #10) to the Main
Frame (#1) using two Butterfly Bolts (#37) per
End Apron.
5. Attach one Leg Side Boards - A (#4) to the Leg
Side Boards - C (#6) using three Screws (#30).
6. Attach one Leg Side Boards -B (#5) to the Leg
Side Boards - C (#6) using three Screws (#30).
8
FIG.1
FIG.2
4
30
6
5
39
37
2
1
3
10
2
Control Box Opening
Scorer Wire Opening
Make Sure the Control Box Opening and the Puck Catcher with
Short Sensor Wire (#25) at the same side.
25
24
23
26