Warning, Electronic scorer operation – Medal Sports WM.COM1324805 User Manual
Page 10

9
YOU ARE NOW READY TO PLAY!
1. Open the Electronic Scorer and then insert 3 pcs AA batteries (not included) in the order of polarity as shown
inside the Battery Box.
2. When “HOME/VISITOR” indicates “00”, press the “START” button on the Scorer to start a game.
3. When the “HOME” player scores a point, the “HOME” indicator will show 1 point.
4. When the “VISITOR” player scores a point, the “VISITOR” indicator will show 1 point.
5. Press “START” button at any time during the game and it will reset the scorer. The scorer will show “00” on
“HOME/VISITOR” to restart the game.
6. Press the “ON/OFF” button at any time during the game to turn off the scorer. Press again the “ON/OFF”
button to turn the power on.
7. The scorer will turn off automatically when not in use the game for 15 minutes. Press the “ON/OFF” button to
turn on the scorer again.
a.
Batteries must be installed according to the correct polarization (+ and -) required.
b. If the game will not be used for a long period of time, we recommend that the batteries
should be removed.
c. Please clean the battery contacts and also those of the devices prior to battery installa-
tion.
Reminding:
ELECTRONIC SCORER
OPERATION
3 AA Batteries
This device complies with the part 15 of the FCC rules.
Operation is subject to the following two conditions :
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may
cause undesired operation.
WARNING:
!
1) Require 3 pcs AA Batteries (Not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or rechangeable (nickel-cadmium) batteries.