Medal Sports WM.COM1324805 - Manual (Page 9)

8
FIG. 8
FIG.7
21. Place the Handles (#24) onto the Rods top which has a hole. And then place the Rod End Caps (#25) onto the
other side of the Rods.
22. Insert the wire from the Electronic Scorer (#20) through the opening on the End Apron (#2), and then attach the
Electronic Scorer (#20) to the End Apron (#2) using two Screws (#12) as shown in FIG.7A.
23. Attach the Slide Scorer (#36) to the other End Apron (#3) using three Screws (#11).
FIG.8
24. Underneath the table, connect the Scorer Wire (#20) with the Connect Box (#21).
25. Connect the Sensor Wires (pre-installed on the End Aprons) with the Connect Box (#21).
Underneath the Table
Connect Box
Short Sensor Wire Long Sensor Wire
Scorer Wire
Electronic Scorer
FIG. 7
24
25
11
36
3
2
Scorer Wire
20
20
12
FIG. 7A