Medal Sports WM.COM1324805 - Manual (Page 8)

7
FIG.6
15. Slide the Rods (#17-19) through the Rod Bushings (#33) on one Side Apron (#1) in the order as shown in
Fig.6 and 6A.
Note: The player Rods have a hole at their end where the Handles (#24) will go.
16. Assemble 2, 3, 5-Player Rods, place the Rubber Bumpers (#28) and Players (#22 and #23) onto the Player
Rods (#17, #18 and #19) in the order as shown in Fig.6, 6A and 6B.
17. Assemble 1-Player Rods, place the parts in the order as shown in Fig.6C.
18. Now insert the Player Rods through the Rod Bushings (#33) on the opposite Side Apron (#1).
19. Attach the Players (#22 or #23) to the Rods using two Bolts (#15) per Player. See FIG.6C.
20. Attach the Stop Rings (#27) to the Rods (#18) using two Bolts (#15) per Stop Ring. See FIG.6C.
Note: The goalie should be at the left side of each player.
Note: The handles (#24) should be on the same side of the
rods for the same team, and each team’s players should be
facing their opponent.
FIG. 6C
FIG. 6B
The Hole
FIG.6
22
28
28
28
15
15
27
28
18
33
33
ORDER OF PLAYERS
(Overhead View)
18
18
17
17
19
18
18
19
= BLUE
= YELLOW
17
FIG. 6A