Precision Digital PD562 - Manual (Page 10)

2. Front Panel Buttons and LED Indicators
KEY Function
Pressing SET/ENT key for at least 3 seconds switches between the operating display and
the parameter setting display. This key is used to verify and bypass parameter settings
when in the parameter group display.
Used to move to the next digit when setting parameters.
S / T
(UP/DOWN)
W (SHIFT)
SET/ENT
(ENTER)
LED Function
ALM1, 2, 3 LEDs turn on when the corresponding alarm relays are energized.
Control Keys
LED Display
Used to change the value of digits when setting parameters.
Used to move between parameter groups.
PD560 Series Nova Digital Process and Temperature Meter Instruction Manual
10